||Pentium II or higher
||256 MB or higher
||TCP/IP installed and configured
|Hard disk capacity
||9 MB of free space
After installing the server, it runs for 30 days in the
evaluation mode. You have to purchase and
install a license key in order to continue running the
Wireless Application Requirements
You need a Wi-Fi access point with WPA Enterprise security
support. Most access points manufactured today meet this
requirement. It means that an access point supports WPA and can
send authentication requests to a RADIUS server. You may search for
here at the Wi-Fi Alliance web site.
Client Wi-Fi hardware should support WPA, too. You may search
for WPA Enterprise compliant adapters
Software support for WPA is built-in in Windows XP Service Pack
1 or later, Windows 2003 Server Service Pack 1, Windows Vista.
There are also commercial and open source clients available.
Running EAP-TLS authentication on a client requires installing
an X.509 client certificate. You may use certificates obtained from
your own existing certificate authority (CA), purchase from a
commercial CA or create them through your self-signed root
You must configure ClearBox Server with an X.509 server
certificate in order to perform EAP-TLS or PEAP authentication. You
may use a certificate obtained from your own existing certificate
authority (CA), purchase from a commercial CA or create your own
self-signed root certificate and the server certificate. In the
latter case the root certificate should be spread among clients in
order to include it in trusted CAs.
© 2001-2007 XPerience Technologies. www.xperiencetech.com